Grass Valley Aurora Edit LD v.6.0a Installation - Manual (Page 33)

Connecting the Keyboard and Mouse
Aurora Edit Installation and Configuration Guide 33
Connecting the Keyboard and Mouse
To connect the keyboard and mouse:
1. Plug the keyboard cable into the purple PS/2 port (or USB port) on the back
of the Aurora Edit workstation.
2. Plug the mouse cable into the green PS/2 port (or USB port) on the back of
the Aurora Edit workstation.
Connecting the Workstation Monitor
You can connect one or two workstation monitors to your system.
To connect a single monitor:
1. Plug the VGA1 connector on the other end of the NVIDIA output adapter
cable into the monitor cable (for the primary monitor).
2. If necessary, plug the other end of the monitor cable to the VIDEO IN port on
the back of the monitor.
Some workstation monitors have the cable permanently attached to the back
of the monitor.
3. Plug the monitor’s power cable into the back of the monitor and into a power
strip or wall outlet.
To connect two workstation monitors to your system:
• Follow the instructions for the single monitor, but in addition, plug the VGA2
connector on the NVIDIA output adapter cable into the monitor cable for the
second monitor.
Connecting the Power Cable
To connect the power cable:
• Plug the power cable from the back of the Aurora Edit workstation to a
power strip or wall outlet.
Connecting Network Cables
Depending on the type of network you have, and the type of storage system
you’ve chosen to use, you have different boards in your Aurora Edit system.