Grass Valley Aurora Edit LD v.6.0a Installation - Manual (Page 35)

Connecting a Video Tape Recorder
Aurora Edit Installation and Configuration Guide 35
Connecting a Video Tape Recorder
In most situations, you connect a VTR to your system to get footage from tape.
To connect a VTR to your system:
1. Using a remote serial cable, plug one end into the top RS-422 port on the
back of the Aurora Edit workstation.
2. Plug the other end of the cable into the back of the VTR.
Connecting Audio and Video Cables to the
Breakout Box
The following illustration and table details how to connect other video and
audio cables to your Aurora Edit system.
Balanced Audio IN
Channels 1 & 2
Balanced Audio OUT
Channels 1 & 2
AES/EBU Audio
IN & OUT
Serial
Digital
IN
Serial
Digital
OUT
External
Reference
(loop)
Composite/
Component
Video IN
Composite/
Component
Video OUT
RS-422
Machine
Control
Analog Audio
Output
Ch. 1 In Ch. 1 Out Ch. 2 In Ch. 2 Out Ch. 1/2 In Ch. 1/2 Out
BALANCED AUDIO
Ch. 1/2
AES/EBU
Audio
In
Out
In
Out
In
Out
In
Out
1 2
SDI Ref Loop Y/CVBS Pb/Y Pr/C Ch.1(L) Ch.2(R)
RS-422