Grass Valley Aurora Edit LD v.6.0a Installation - Manual (Page 40)

Chapter 3 Installing Aurora Edit Video Boards and Breakout Boxes (Optional)
40 Aurora Edit Installation and Configuration Guide
SDR and HDR Board and Breakout Box
Installation Procedure
Aurora Edit offers two 19” 1RU rack-mountable Breakout Boxes with
corresponding cards: SDR (standard definition) and HDR (high definition).
Both the SDR and HDR Breakout Box have the same front panel.
Using a Breakout Box and board requires that you have an Aurora Edit
workstation. Before installing your board and Breakout Box, you must prepare
the workstation.
Preparing the Aurora Edit Workstation
To prepare the workstation for any box-board combination:
1. Power up the Aurora Edit workstation and, during the boot-up process,
access BIOS setup (F10 key).
2. Select Advanced , then Thermal .
3. Enable the option: Full Speed Chassis Fans .
4. Start Windows and click Start > Settings > Control Panel .
The Control Panel window appears.
5. Double-click Administrative Tools > Local Security Policy .
The Local Security Settings window appears.
6. Click Local Policies then double-click Security Options .
A list of security policy/setting options appears.
7. Scroll down to Network access: Sharing and security model for local
accounts and double-click on it. Change the Network access setting to:
Classic - local users authenticate as themselves . Click OK .
Ch. 1 In Ch. 1 Out Ch. 2 In Ch. 2 Out Ch. 1/2 In Ch. 1/2 Out
BALANCED AUDIO
Ch. 1/2
AES/EBU
Audio
In
Out
In
Out
In
Out
In
Out
1 2
SDI Ref Loop Y/CVBS Pb/Y Pr/C Ch.1(L) Ch.2(R)
RS-422