Grass Valley Aurora Edit LD v.6.0a Installation User Manual
Page 82
Chapter 7
SmartBins
82
Aurora Edit Installation and Configuration Guide
Run the SmartBins Setup Tool for Transfer SmartBins
If you are using SmartBins on a NAS or K2 system, you need to configure your
M-Series iVDR(s), Profile XP, or K2 Media Server to use SmartBins.
NOTE: You don’t need to configure SmartBins on an Open SAN
system.
To configure the SmartBins Service on a NAS or K2 system:
1. Go to
Start | Programs | Aurora 6.0 | SmartBins Setup Tool
.
The SmartBins Setup Tool opens.
2. Select the
Total Maximum Transfers
from the drop-down list.
The Total Maximum Transfers is the total amount of streams for this particular
instance of the SmartBins Service. Select
4
if the SmartBins Service is installed
Installation Complete
Click
OK
to close the installation program. The
workstation prompts you to reboot so the new
settings take effect.
On this screen...
Do this...