Grass Valley Aurora Edit LD v.6.0a Installation - Manual (Page 42)

Chapter 3 Installing Aurora Edit Video Boards and Breakout Boxes (Optional)
42 Aurora Edit Installation and Configuration Guide
Cabling the SDR Board to the SDR Breakout Box
The SDR and HDR Breakout Box and their corresponding cards have different
cable attachments. To connect an SDR board to an SDR Breakout Box:
1. Using the breakout cable provided with the Breakout Box:
a. Connect the 60-pin plug to the back of the Breakout Box; connect the
other cable end to the 60-pin plug in the board endplate.
b. Connect the three BNC cable connectors to the back of the Breakout Box;
connect the other cable end to the 9-pin D connector on the board
endplate.
.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
The class A digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe A est conforme a la norme NMB-003 du Canada.
( ( KBox
SDI IN
CONNECT TO HOST
SDI OUT 1 SDI OUT 2 J1
BNC Connectors
Align slots in cable
connector barrel with
connector pins.
Slide barrel over pins and
rotate barrel to lock
connectors together.
Pin
Barrel