Grass Valley Aurora Edit LD v.6.0a Installation - Manual (Page 58)

Chapter 6 Installing Software
58 Aurora Edit Installation and Configuration Guide
Installing the Aurora Edit Software
The Aurora Edit software should already be installed on your workstation when
your system arrives. If you ever need to install it, follow these instructions.
NOTE: If you have an old version of News Edit or Aurora Edit
software installed on your workstation, you first need to uninstall it.
To uninstall software, go to your desktop and click Start>Control
Panel>Add or Remove Programs.
To install the Aurora Edit software:
1. Insert the Aurora Edit CD into your CD drive and navigate to Software
Installs | DNP Application .
2. Double-click on SetupAuroraEdit.exe .
The Profile Software Not Detected Window appears:
3. Click OK.
The Profile Software loads automatically.
4. Follow the directions below for using Local or Shared Storage.
If your system is part of an Open SAN system or connected to Network
Attached Storage (NAS) or a K2 Server, use the instructions for Shared
Storage; otherwise, use the instructions for Local Storage.