Grass Valley Aurora Edit LD v.6.0a Installation - Manual (Page 69)

Configuring the Disk Volume
Aurora Edit Installation and Configuration Guide 69
Configuring the Disk Volume
When you install Aurora Edit 6.0 software for the first time, the Disk Volume
Configuration window appears during the process. You need to configure the
shared volume for your type of network and equipment. The Disk Volume
Configuration only needs to be done once on each shared volume, on the first
Aurora Edit system installing the 6.0 version of software.
To configure the disk volume:
1. Select the disk volume drive letter and configure the volume as follows:
Setting Options Description
Disk Volume Type Unknown
LocalDisk
Open SAN
NAS
K2 Storage Select your type of shared storage.
Disk Volume Model Unknown
Grass Valley PFR500,
PFR600, PFR700, PFR800
Ciprico 1700, 2400, 3600
IBM NAS
Open SAN:
Choose
Grass Valley PFR500 , PFR600 , PFR700 , or
PFR800 ; if you don’t know, select PFR600 .
NAS:
Choose
Ciprico 1700 , 2400 , 3600 , or IBM NAS .
K2 Storage:
Choose
Grass Valley PFR700 .