H3C Technologies H3C S12500 Series Switches - Manual (Page 90)

80
Figure 62 Removing a power monitoring module from the S12504
Figure 63 Removing a power monitoring module from the S12508 or S12518
2. Put the removed power monitoring module in an antistatic bag or in its original shipping materials.
3. Install the new power monitoring module.
a. Unpack a new power monitoring module.
b. Insert the power monitoring module slowly along the slide rails until it fits in completely.
c. Fasten the captive screws on the power monitoring module.
Figure 64 Installing the power monitoring module in the S12504
Figure 65 Installing the power monitoring module in the S12508 or S12518