H3C Technologies H3C S12500 Series Switches - Manual (Page 112)

102
Item Specifications
Interfaces
• 1 console port
• 1 AUX port
• 1 network
management port
• 1 CF card slot
• 2 USB ports—HOST
and DEV (DEV is not
supported)
• 2 MCC GE ports
• 1 console port
• 1 USB console port
• 1 network
management port
• 1 ECP port (reserved)
• 1 CF card slot
• 1 USB ports
• 2 MCC GE ports
• 1 console port
• 1 USB console port
• 1 network
management port
• 1 ECP port (reserved)
• 1 CF card slot
• 1 USB ports
• 2 MCC GE ports
NOTE:
The MCC GE port is supported only in Release 73xx or later.
Switching fabric modules
IMPORTANT:
Use the switching fabric modules of the same model on an S12500.
An S12504 needs to be configured with three to four switching fabric modules. An S12508/S12518
needs to be configured with six to nine switching fabric modules. Install all switching fabric modules to
your switch.
Table 26 Switching fabric module specifications
Model BootWare SDRAM Compatible switch
LST1SF08B1 4 MB 128 MB
• S12508-AC-1
• S12508-DC-1
LST1SF18B1 4 MB 128 MB
• S12518-AC-1
• S12518-DC-1
LST2SF08C1 4 MB 128 MB
• S12504-AC
• S12504-DC
• S12508-AC-2
• S12508-DC-2
LST2SF18C1 4 MB 128 MB
• S12518-AC-2
• S12518-DC-2
LST1SF08E1 8 MB 512 MB
• S12508-AC-3
• S12508-DC-3
LST1SF18E1 8 MB 512 MB
• S12518-AC-3
• S12518-DC-3