H3C Technologies H3C S12500 Series Switches - Manual (Page 52)

42
Connection procedure
Figure 43 Connecting through the console port and the serial port
To connect the console cable through the console port:
1. Connect the DB-9 connector of the console cable to the serial port on a PC or terminal.
2. Connect the RJ-45 connector of the console cable to the console port on the MPU of the switch.
To connect the console cable through the USB console port:
1. Connect the USB-A connector of the console cable to the USB port on a PC or terminal.
2. Connect the mini-USB A/B connector of the console cable to the USB console port on the MPU of
the switch.
NOTE:
•
If two MPUs are installed on the switch, log in through the console port or USB console port on the active
MPU (typically with a smaller slot number) for the first login.
• When you remove the console cable, first disconnect the switch end, and then disconnect the PC end.