H3C Technologies H3C S12500 Series Switches - Manual (Page 23)

13
Item Quantity Purpose
M4*8 screw 1 set
Attaches the mounting brackets to the
switch.
Supplied with the S12504 switch.
M6*12 screw 1 set
Secures the switch to the rack.
M6 cage nut 1 set
ESD wrist strap 2 ESD prevention.
Cable tie Several
Organizes and secures AC power
cords.
Supplied with the S12508 and
S12518 switches.
NOTE:
The number of screws, nuts, and cable ties supplied with the switch depends on those shipped from the
factory.
User-supplied tools and equipment
• Mechanical lift
• Phillips screwdriver P1 – 100 mm, P2 – 150 mm, and P3 – 250 mm
• Flat screwdriver P4 – 75 mm
• Marker
• Tape
• Diagonal pliers, wire-stripping pliers, and wire clippers
• Socket wrench
• Cables such as network cables and fiber cables
• Meters and equipment, such as hub and multimeter
• Configuration terminal, such as PC
NOTE:
The rack accessories and installation tools are not included in this section. They might vary depending on
the rack model. For more information, see the installation guide of the corresponding rack.