Wavetronix Click 342 (lean managed ethernet switch) (CLK-342) - Managed Switches User Guide - Manual (Page 56)

CHAPTER 6 • RAPID SPANNING TREE 55
Note
While learning the network topology, the switch temporarily does not participate in
network communication.
Enabling RSTP with Web-based Management
Activate Web-based management for the switches by using the Factory Manager to switch
to the General Configuration menu, then the User Interfaces page. Activate the (Rapid)
Spanning Tree function under Redundancy and confirm by entering your password.
Figure 6.2 – User Interfaces Menu
Note
The previously created configuration is lost if “No redundancy” is selected in the
WBM menu following RSTP configuration.
Now switch to the RSTP General menu. Here you will find various information about the
Spanning Tree configuration (see Figure 6.3).
Figure 6.3 – RSTP General Web Page
The Web page displays the parameters with which the switch is currently operating.
The root port of a switch connects this switch to the root switch—either directly or via an-
other designated switch (the port at a designated switch that is connected to the root port