Functions/information in wbm, Password concept – Wavetronix Click 342 (lean managed ethernet switch) (CLK-342) - Managed Switches User Guide User Manual
Page 29
28
CHAPTER 4 • WEB-BASED MANAGEMENT (WBM)
“http://172.16.29.112”).
For full operation of the Web pages, the browser must support JavaScript 1.2 and cascading
style sheets Level 1. It is recommended that you use Microsoft Internet Explorer 6.0.
Note
Web-based management can only be called using a valid IP address. By default upon
delivery, the switch has no valid IP address.
Settings are not automatically saved permanently. The active configuration can be saved
permanently by selecting Save current configuration on the Configuration Management
Web page.
The Web pages are divided into the following four areas:
˽
Device type and device logo
˽
Device name (assigned by the user) and loading time, to prevent mix-ups
˽
Navigation tree on the left-hand side
˽
Information tables, which contain current device information during runtime
Password Concept
After having entered a valid password, no further entry of the password is necessary for a
period of 300 seconds (default). After this period of time has elapsed or after clicking on
Logout, the password must be re-entered.
The period of time can be set using the “flWorkFWCtrlLoginExpire” SNMP object within a
range of 30 seconds to 3600 sseconds (default 300 seconds).
The concept is valid for the first ten users. All further users must confirm each modification
of the configuration with the password.
Functions/Information in WBM
The navigation tree provides direct access to the following four areas:
˽
General Instructions – Basic information about WBM.
˽
Device Information – General device information.
˽
General Configuration – General device configuration.
˽
Switch Station – Device-specific configuration and diagnostics.