Wavetronix Click 342 (lean managed ethernet switch) (CLK-342) - Managed Switches User Guide - Manual (Page 48)

CHAPTER 5 • RS-232 (V.24) INTERFACE 47
Note
All settings are transferred using Apply, but are not saved permanently. Use the
Save function to save the active configuration settings permanently..
The login screen indicates the version of the firmware used. A password must be entered
to make other settings. By default upon delivery, the password is “private.” Change to your
own secure password as soon as possible via SNMP or WBM (see Chapter 4).
Figure 5.2 – User Interface Login Screen
The figure below shows the basic switch configuration (see Figure 5.3).
Figure 5.3 – IP Configuration in the User Interface
As well as displaying the set MAC address, this screen can be used to view or modify the
IP parameters.