Wavetronix Click 342 (lean managed ethernet switch) (CLK-342) - Managed Switches User Guide - Manual (Page 49)

48 CHAPTER 5 • RS-232 (V.24) INTERFACE
Note
In order to set the IP parameters, the Static option must be selected for IP Parameter
Assignment.
This user interface screen can be used to determine the addressing mechanism or to trigger
a device restart.
Note
All settings are transferred using APPLY, but are not saved permanently. Use the
SAVE function to save the active configuration settings permanently.
Resetting to Default Settings
This screen can be used to reset the switch to the settings default upon delivery or to restart
it. This screen can be opened by first setting the Reset Switch option or the Reset Switch to
factory defaults option in the Basic Switch Configuration screen, and then selecting Apply
or Save. This undoes any changes to the configuration, and resets all IP parameters to the
settings default upon delivery.
Figure 5.4 – Resetting to Default Settings
Note
Resetting to the default settings also resets the password to “private.” For security
reasons, we recommend you enter a new, unique password.