Wavetronix Click 342 (lean managed ethernet switch) (CLK-342) - Managed Switches User Guide - Manual (Page 35)

34 CHAPTER 4 • WEB-BASED MANAGEMENT (WBM)
save the active configuration or load a new configuration, and to modify them (by entering
a valid password). It can also be used to restart the system with the relevant configuration
(see Figure 4.12).
Figure 4.12 – Configuration Management Web Page
The following are possible states for Status of current configuration:
˽ The configuration has been modified but not saved.
˽ The current configuration is saving.
˽ The current configuration is equal to the one saved in the non-volatile memory of the
switch.
˽ The current configuration was saved.
Note
If the new configuration is not activated by a reset after a configuration download,
the
Save current configuration command overwrites the previously loaded configu-
ration and instead saves the active configuration of the managed switch.
This option can be used to reset the switch to its default settings (default upon delivery) by
entering a valid password (see Figure 4.13).
Figure 4.13 – Set default upon delivery Window
Note
Web-based management can only be called using a valid IP address. Once the switch
has been reset to its default settings, it has no valid IP address.