Visara 1481 - Manual (Page 68)

6-4 701408-002
Problem Determination and Maintenance
NVRAM Counter
The NVRAM Counter counts the number of times the NVRAM has been written to.
Enter Serial #
Note: Check with your system operator before changing this value.
Enter your display station’s serial number by using the Up and Down Arrow keys to
highlight Enter Serial # and pressing the Enter key. The numbers 1–10 and the
alphabet appear above the status row line. Follow these steps:
1) Move the underline cursor using the Left and Right Arrow keys until the appropriate
symbol is displayed in the first character image block in the serial number entry
area.
2) Press the Enter key when the underline cursor is located under the character that you
want to select. The entry block automatically moves to the next position in the serial
number entry area and the underline cursor moves under the displayed character.
3) Repeat Steps 1 and 2 until all digits of your serial number are entered. You can
correct the characters you enter when the last character is entered and the cursor
wraps. To clear all entries, press the Clear key.
4) When you complete the entry of your serial number, press the Reset key. The
System Manager menu is displayed.
Figure 6-4. Enter Serial # Screen
Use Arrow Keys to choose item
Use ENTER Key to change item
RESET Key Exits
KBD Test
0000 0000
Screen Alignment
NVRAM Counters
Enter Serial # 123456789
10111000 1111 KBD Switches
Reset NVRAM
These screens are for System Managers and service technicians.
Highlighted Tests may destroy data!!
_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ