Visara 1481 - Manual (Page 31)

3-12 701408-002
Setup Procedures
Auto Skip
You can configure your display station’s local printer to advance a selected number of
lines after it performs a local print. To set up or change the lines to be advanced, use the
Up and Down Arrow keys to highlight Auto Skip, then follow these steps:
1) Press Enter. The selection area for the Auto Skip function is highlighted.
2) Use arrow keys to select a new value. Allowable values are Off, 1–14, and Form
Feed. The number you select is the number of lines you want the local printer to
advance after performing a local print operation.
Leaving the Offline Printer Menu
To leave the Offline Printer menu, use the Left and Right Arrow keys to display another
offline setup menu or press the Reset key to exit from Offline Setup mode and return to
the Offline Test menu (Figure 2-5 on Page 2-7).
To save the options you set on the Offline Printer menu, after you leave Offline Setup
mode, you must highlight Go Online on the Offline Test menu and press the Enter key.
Offline Miscellaneous Menu
To display the options on the Offline Miscellaneous menu, use the Left and Right
Arrow keys to highlight Miscellaneous on the Offline menu and press the Enter key. The
Offline Miscellaneous menu is displayed (Figure 3-7).
Figure 3-7. Offline Miscellaneous Menu
Offline Menu Screen
Screen Cursor Keyboard Printer Miscellaneous
Use Arrow Keys to choose item
Use ENTER Key to change item
RESET Key Exits
Setup Language English
10 minutes
Status Row Only
Dim Timer
Dim Style
Coax Indicator
On
VPD Off