Visara 1481 - Manual (Page 15)

701408-002 2-3
Customer Installation
Unpacking Instructions
Figure 2-1. Display Station Packaging
1) Move the carton to the work area.
2) Open the carton from the top.
3) Remove the accessories carton. From the accessories carton, remove the operator’s
manual, power cord, and, if ordered, the light pen. Place these items conveniently
aside.
4) Remove the carton containing the Keyboard element. Remove the keyboard and
place it aside.
5) Remove the carton containing the Display/Logic element. Open the carton and
remove the Tilt/Rotate stand and the Display/Logic element. Remove the two side
cushions. Place the Display/Logic element on a sturdy, flat surface. See “Installing
the Tilt/Rotate Stand” on Page 2-4 for instructions on how to install the Tilt/Rotate
stand.
Packing Instructions
1) To pack the Display/Logic element for shipment, repack the element in its
appropriate box. Use reinforced nylon tape to close the box.
2) To pack the Keyboard element for shipment, repack the element in its appropriate
box. Use reinforced nylon tape to close the box.
Accessories
Keyboard Element
Display/Logic Element
with
Tilt/Rotate Stand