Visara 1481 - Manual (Page 22)

701408-002 3-3
Setup Procedures
Reset – Press the Reset key to restore keyboard operations after an error condition, to
end character insertion in Insert mode, or to terminate a printer identification sequence
before all characters have been entered.
Change Screen – Press the Change Screen key to toggle between sessions. The Change
Screen key does not work with all controllers. The Change Screen key may not function
on the 88-key keyboard.
PA3 – The PA3 key is an additional function key. It does not work with all controllers. To
use the PA3 key on the 88-key keyboard, hold down both the Alt and Shift keys while
you press the PA3 key.
Figure 3-1. Keyboard Key Functions
Each keyboard type contains autorepeat keys that repeat their functions as long as they
are pressed. The autorepeat keys include all keys that enter alphabetic, numeric, or
symbol characters, the space bar, all keys that assign or move the cursor position, and
the following special-purpose Data Entry keyboard keys:
• Field Mark
• Duplicate
• Skip
The following keys are not supported by the 1481:
• Recrd
• Play
• Back
• Fwd
• Pause
Shift Function
Nonshift Function
Alt Function
Key Top
Key Face