Visara 1481 - Manual (Page 38)

701408-002 3-19
Setup Procedures
Mark Unprotected Fields Function
Figure 3-14. Online Mark Unprotected Fields Function
Use the Enter key to turn Mark Unprotected Fields off or on. 0 (off) or 1 (on) is
displayed in the last field of the Mark Unprotected Fields function.
When your selection for Mark Unprotected Fields is displayed, press the Up and Down
Arrow keys to scroll forward or backward to the next online setup function or hold down
the Alt key while you press the Setup key (for the 102-key keyboard, hold down the Shift
key while you press the Setup key) to exit from Online Setup mode.
Indicators
Power-On Indicator
When lit, indicates that the display station is powered on. See Figure 2-3 on Page 2-5.
Cursor
After the display station is powered on and warmed up, if it is attached to an inactive
host, a cursor is displayed in the upper left corner of the screen. If the host is active, the
cursor is positioned as specified by the host. As data characters are entered through the
keyboard, the cursor moves to the next available screen character position.
Operator Status Row Indicators
This is the area below the last data row and is separated from the rest of the screen by
one nonintensified line. The operator status row contains symbols that indicate current
operating conditions. These symbols can be divided between System indicators and
Local indicators.
0
Mark Unprotected Fields
Turned Off
‘—’