Visara 1481 - Manual (Page 17)

701408-002 2-5
Customer Installation
Setting Up the Workstation
1) Place the Display/Logic element within connecting distance of an appropriate AC
power outlet.
2) Place the keyboard in front of the Display/Logic element. Pull out the feet
underneath the keyboard to adjust it to a higher setting, if desired. Insert the
keyboard plug into the receptacle on the back of the Display/Logic element. See
Figure 2-4 for the keyboard plug receptacle location.
3) Attach the printer cable (provided with your printer) to the connector on the back of
the Display/Logic element as displayed in Figure 2-4.
4) Make sure that the Power-On/Off switch is set to Off (see Figure 2-3).
5) Plug the power cord into the power receptacle on the back of the Display/Logic element
(see Figure 2-4).
Figure 2-3. 1481 Front View
Contrast Control
Power–On/Off
Switch
Power–On
Indicator
Brightness Control
Light Pen