Sundance SMT310Q - Manual (Page 44)

Version 2.1 Page 44 of 55 SMT310Q User Manual
12.4
Reset and Config headers
There are pairs of headers for /TIMRESET and /TIMCONFIG to allow several
SMT310Qs to be chained together. The /TIMRESET headers are J10 (Reset
Out) and J9 (Reset In), and the /TIMCONFIG headers are J12 (Config Out) and
J17 (Config In).
Below is the pin out for each header:
Pin Signal
1 /TIMRESET
2 GND
Table 18: Reset header pin out (IN/OUT)
Pin Signal
1 /TIMCONFIG
2 GND
Table 19: Config header pin out (IN/OUT)
Pin 1 of header is the lower pin. These headers should be chained together for
all boards in the system, Out to In.