Sundance SMT310Q - Manual (Page 38)

Version 2.1 Page 38 of 55 SMT310Q User Manual
12. Cables and Connectors
12.1
SDB
No SDB cables are supplied with the SMT310Q. You can order them separately
from Sundance with part number SMT510-SDBxx, where xx is the cable length
in centimetres.
12.1.1 SDB Connector
Function Pin Pin Function Function Pin Pin Function
GND 2 1 CLK D9 21 22 GND
GND 4 3 D0 D10 23 24 GND
GND 6 5 D1 D11 25 26 GND
GND 8 7 D2 D12 27 28 GND
GND 10 9 D3 D13 29 30 GND
GND 12 11 D4 D14 31 32 GND
GND 14 13 D5 D15 33 34 GND
GND 16 15 D 6 USERDEF0 35 36 GND
GND 18 17 D7 WEN 37 38 REQ
GND 20 19 D8 USERDEF1 39 40 ACK
Table 12: SDB Pin-out
12.2
Comports
12.2.1 FMS Cabling
The cables used with FMS connectors are not supplied with the SMT310Q.
You can order them separately from Sundance with part number SMT500-
FMSxx, where xx is the cable length in centimetres.
When fitting FMS cables, make sure they have a twist: one end must have the
blue side facing out and the other must have the silver side facing out.
Important Note.
If using FMS cables between two SMT310Qs 4 the reset headers must be
connected to ensure that all comports reset at the same time.
See Reset and Config headers
4 This is not recommended as long FMS cables can introduce communication problems.