Seaward DO7010 - Manual (Page 8)

Page 7 of 43 Issue 02/2007
Connectors
Battery
Red/Green LEDS
LCD Screen Navigator
Measure
Enter Function keys
ON/OFF
1-2 TECHNICAL SPECIFICATIONS:
1-2-1 Front panel
Main display on the unit:
64 x 240 points LCD matrix (liquid crystal display) with
electroluminescent diode backlight.
6000 digit measurement and location test point display with large
characters and small characters for:
- units
- measurement range
- measurement current
- battery charge level
- error code ( measurement, polarity…)
Keyboard:
- 5 function keys changing according to the menus.
- 4 navigation keys: arrows UP, DOWN, RIGHT, LEFT.
- 1 data enter key
- 1 software power ON key
- 1 mechanical key to trigger the measurement.
Visual and audible signal:
- Audible signal when pressing keyboard ( can be disabled)
- Audible signal with error message and FAIL measurements
- Red and Green LEDS for PASS/FAIL measurement results.
Measurement connection:
- 2 circular connectors (3 and 4 pins) with locking system from JAEGER
RS232 interface :
- sub-D 9 pins connector for PC and RCU connection
Operating Instructions Digital Microhmmeter Type DO7010
6
•
•