Seaward DO7010 - Manual (Page 12)

1-2-10 Remote Control Unit (RCU) specifications (DO7010-REM)
On option, the DO7010 unit can work in conjunction with a remote control unit
(DO7010-REM)
The DO7010 RCU is made in a shock proof black colour polystyrene case. It includes
a 64x240 dot matrix graphic LCD screen with backlight, a beeper, red and green LED,
a set of 5 function keys and a 4 direction navigator with an enter key.
The RCU also includes a battery back up memory, allowing uploading measurement
results in to a PC computer without having to transport the DO7010 main unit.
The RCU is connected to the DO7010 with a 3 meter long cable, which can be
extended to 15 meters.
RCU dimensions:
- Length : 200 mm
- Width : 120 mm
- High : 60 mm
Weight:
- 600 g
Display:
64x240 points LCD matrix (liquid crystal display) with electroluminescent
diode backlight.
6000 digit measurement and location test point display in large and small
characters for:
-
-
measurement range
- measurement current
- battery charge level
- Error code (measurement, polarity…)
Keyboard:
- 5 function keys changing according to the menus.
- 4 navigation keys: arrows UP, DOWN, RIGHT, LEFT.
- 1 data enter key
- 1 software power ON key
- 1 mechanical key to trigger the measurement.
Visual and audible signal:
- Audible signal when pressing keyboard ( can be disabled)
- Audible signal with error message and FAILED measurements
- Red and Green LEDS for PASS/FAIL measurement results.
Battery charge level:
From 0 to 99%
Operation:
The RCU can be operated either by hand, or strapped to the fore arm to make
the measurement easier.
units
Operating Instructions Digital Microhmmeter Type DO7010
10