Seaward DO7010 - Manual (Page 14)

The DO7010 unit and the PC exchange data through a serial RS232 interface, with a
special cable DO7010-179A provided with DO7010-PRO software (DO7010-09
option).
The operator brings the DO7010 to the data storage PC computer, equipped with the
DO7010-179A cable, and downloads a measurement sequence into the DO7010
memory.
The memorisation of the protocol as well as the measurement results are done in the
DO7010 unit.
Then, the operator brings the DO7010 into the production area and executes all the
measurements.
When the measurement protocol (complete or partial) is over, the operator brings the
DO7010 to the data storage PC computer equipped with the DO7010-179A cable.
The DO7010 unit is connected to the DO7010-179A and the DO7010-PRO software
(DO7010-09 option) allowing DO7010 memory transfer into the PC computer.
Then the DO7010 memory can be cleared and downloaded with a new measurement
protocol.
1-2-11 Data transfer between PC computer and the DO7010
Operating Instructions Digital Microhmmeter Type DO7010
12