Seaward DO7010 - Manual (Page 31)

4-1-4 Log mode:
Φ Select the LOG line
Φ Press on the RIGHT arrow or on the enter key.
Φ When the SEQUENCE mode is empty (no Sequence downloaded in the
DO7010), the MANUAL mode allows storing up to 999 measurements with
the measurement number, the resistance value, the current, the range, the time
and the date.
Φ Select the Log mode with the UP and DOWN arrows:
– OFF = no log mode
– ON = log mode operating if no sequence loaded
– REVIEW = to review the already stored values
– DELETE = to delete the memory
Φ Enter the selection with the Enter key.
LOG# Rx RANGE I DATE TIME
RANGE OFF
CURRENT ON
ZERO REVIEW
AVERAGE DELETE
LOG >
LIMITS
ESC
Operating Instructions Digital Microhmmeter Type DO7010
29
•
•
•
•
•