Seaward DO7010 - Manual (Page 41)

6.1 PRELIMINARY
Our warranty (refer to the beginning of this manual) attests the quality of materials
and workmanship in our products. If malfunction should be suspected or other
6.2 INSTRUMENT RETURN
Before returning an instrument to our Service Department, please contact us for
shipment instructions. Use packaging that is adequate to protect it from damage.
• LCD SCREEN DOESN’T COME UP:
• Recharge the battery block for at least 3 hours.
6.4 CLEANING
6.5 CALIBRATION
SECTION 6 SERVICE and CALIBRATION:
information is required, call our technical assistance: +44 (0) 191 587 8718.
6.3 SERVICE
Our units don’t need particular service, except an annual calibration. If you
continues, please contact our service department.
• Check that the battery block is correctly fitted into the DO7010 unit.
encounter any problems, please follow the brief check list below. If the problem
Please contact our Service department for price and delivery time .
Other reasons for malfunction requires intervention inside the unit by qualified
qualified people following the appropriate procedure and correct standards. Our
people. However we can supply a service manual including schematics of our units.
We recommend calibrating our units each year. The calibration must be performed by
calibration. Please contact us to request cost and return times.
service and calibration department is at your service to perform the annual
Clean the instrument with a damp cloth.
Operating Instructions Digital Microhmmeter Type DO7010
39