Seaward DO7010 - Manual (Page 23)

3-5 Alarm sound level:
Φ Select the BEEPER line
Φ Press on the RIGHT arrow or on the enter key
Φ Set the alarm sound level with the UP and DOWN arrows:
– OFF = no sound when error or failed result
– LO = low alarm sound level.
– HI = high alarm sound level
3-6 Measurement trigger mode:
Φ Select the TRIGGER line
Φ Press on the RIGHT arrow or on the enter key
Φ Set the measurement trigger mode with the UP and DOWN arrows:
– MAN = measurement trigger by the front panel green push button
(MEASURE)
– AUTO = automatic measurement trigger by detection of 100mA
current flowing through the specimen under test, then current pulse
according to the current setup.
DISPLAY MAN
AUTO-OFF AUTO
KEY BEEP
BEEPER
TRIGGER >
DATE
TIME
LANG ESC
DISPLAY OFF
AUTO-OFF LO
KEY BEEP HI
BEEPER >
TRIGGER
DATE
TIME
LANG ESC
Φ Press on the LEFT arrow to go back to the previous menu level
Φ Confirm the change with Enter key, or go back without change with the LEFT arrow
Φ Press on the LEFT arrow to go back to the previous menu level
Φ Confirm the change with Enter key, or go back without change with the LEFT arrow
Operating Instructions Digital Microhmmeter Type DO7010
21
•
•
•
•
•
•
•
•
•
•