Seaward DO7010 - Manual (Page 11)

1-2-7 Power supply
Operating time is about 20 hours, or 1000 measurements @10A.
Visual information on the LCD screen with a numerical value in %, gives the battery
discharge level.
Plugged in the DO7010 or outside of the DO7010, the battery pack can be recharged
with the provided charger connected to the mains (90 -250 volts).
The charge control is fully automatic, and the charge time is less or equal to 3 hours.
Additional battery packs can be purchased separately (DO7010-02)
1-2-8 Unit Dimensions
- High
- Length : 340mm
- Width : 120mm
1-2-9 Weight
< 4.5 kg
Pull out handle RS232 connector
Charger connection
Locking screw
Measurement
push button
Locking screw
The DO7010 is powered by an easily removable NiMH battery pack.
The DO7010 is presented in a grey polyurethane case.
: 275mm
Operating Instructions Digital Microhmmeter Type DO7010
9