Seaward DO7010 - Manual (Page 10)

1-2-5 SEQUENCE mode
In SEQUENCE mode, the DO7010 is able to store 999 measurements with location
number, limit, current, resistance ,date ,time, and operator ID according to a protocol
written under an excel file format. The excel file is created on a PC and then
downloaded to the DO7010.
Protocol header:
- Operator name : T DURANT
- ID: NT76207521
- Date: 02/10/03
- Plane no: 1234567
Each protocol line includes:
- Mechanical drawing no: 1234567890
- Bounding no: 23
- Threshold value: 5m
Ω
- Measurement current : 1 or 10A
- Measurement value: 4,99m
Ω
This data is saved even when the main battery pack is fully discharged, and when
replacing the battery pack.
The keyboard allows you to quickly select the functions, search for the points to be
measured, scrolling the screen pages, etc…
1-2-6 RS232 serial interface:
The DO7010 comes, as standard, with an RS232 serial interface with the following
specifications:
• ANSI/EIA/TIA-232-E61991 specs.
• Baud rate : 9600 bauds
• Start bit : 1
• Bit number : 8
• Parity check : no
• Stop bit : 1
Using the RTS and CTS 5 wires mode provides a hardware synchronisation of the
serial interface.
The commands to control the unit and the SEQUENCE download are in accordance
with the IEEE488-2 standard and follow the SCPI language rules.
Operating Instructions Digital Microhmmeter Type DO7010
8