Scotsman CME506R AutoIQ - Manual (Page 9)

Electrical:
All models must be installed with the correct wire
size and type per the National Electric Code.
Locate the nameplate on the back of the cabinet
and find the numbers for Voltage, Phase, Minimum
Circuit Ampacity and Maximum Fuse Size. Either
fuses or HACR type circuit breakers may be used.
The ice maker is designed to operate on its own
electrical circuit and must be individually fused.
Voltage variation must not exceed the limits listed
on page 2.
The remote condenser is designed to be powered
from the ice machine. A separate knockout
hole has been provided in t
he ice maker electrical
junction box.
Electrical
connections are
made in the
junction box in the
back of the
cabinet.
1. Remove the
junction box cover.
2. Knock out both
holes for a field
supplied strain relief.
3. Install wires and strain
reliefs per code. Note:
Condenser fan motor wires are
tagged.
4. Connect to wires and secure ground
wire to ground screw inside junction
box.
All external wiring should conform to
the national, state and local
electrical code requirements.
Usually an electrical permit will
and the services of a licensed
electrician will be required.
CME506R, 656R, 806R: AutoIQ Cubers
January 2000
Page 9
Condenser Electrical
Connection
Condenser Power
Supply Connection
Ice Machine
Electrical
Connection
Building
Power Supply
Electrical Connection,
Single Unit Shown