Scotsman CME506R AutoIQ - Manual (Page 11)

Plumbing:
All models require an adequate potable water
supply and a gravity drain. The recommendations
for tubing are: Water supply to be 3
8
“ OD. Drain to
be ¾ “ OD.
Supply:
All models have 1 water supply connection, a
3
8
“
male flare at the back of the cabinet.
Drain:
All models have 1 gravity drain connection, a ¾ “
FPT fitting at the back of the cabinet.
It must be vented at the back of the cabinet.
The ice storage bin will have a drain out the back
or base, depending upon the model. Note:
Scotsman HTB555 (shown in this manual) may be
drained either out the back or the base.
Insulation is
recommended for the
ice machine reservoir
and bin drains.
Follow all applicable
codes
CME506R, 656R, 806R: AutoIQ Cubers
January 2000
Page 11
Water Supply
Line, Optional
Filter Shown
Reservoir Drain
Connection
Bin Drain
Connection
Water Supply and
Drain Connections
HTB555 Drain
Set Ups