OpenEye CM-512 - Manual (Page 51)

31362AC 51
Privacy Mask
The purpose of the Privacy Mask function is to avoid any intrusive monitoring. Users
can adjust the camera view position using the joystick and adjust the mask size and
area via the direction keys on the control keyboard. The dome camera will recognize
the center of the selected view as a starting point, so the joystick will be locked as
users enter the SET MASK menu. Refer to the following descriptions for setting the
privacy masks.
Note
The Image Flip function and the Image Inverse function will be disabled
automatically while the Privacy mask function is enabled.
Privacy Switch
Enable or disable the masking function. Set this to ON before configuring mask
zones.
Transparency
The privacy masks can be set to be transparent by selecting ON.
Color
Choose BLACK, WHITE, RED, GREEN, BLUE, CYAN, YELLOW, or MAGENTA as
the color of your privacy mask.
PRIVACY MASK MENU
PRIVACY SWITCH OFF
TRANSPARENCY OFF
COLOR BLACK
SET MASK 01
CLEAR MASK 01
EXIT YES