OpenEye CM-512 - Manual (Page 38)

38
OSD Auto Close
Use this function to set your camera to turn off the on-screen display (OSD) after a
period of inactivity. set the OSD to close automatically after 1 to 30 seconds of
inactivity, or set the function to OFF to leave the OSD open unless a user manually
closes it.
System Reset
System Reset – Select this item for system restart. The system will not return to
default settings.
Default System – Select this item to return to default settings.
Exit
Exit TELEMETRY CTRL and go back to the MAIN PAGE 1. Go to MAIN PAGE 2 to
set other functions.
ID Display
Press the direction key down to change the MAIN MENU page from 1 to 2. The main
menu item, ID DISPLAY, will appear on the top. To choose whether the dome ID will
be displayed on screen for identifying the domes, select On or Off. For more
information, please refer to Dome ID Setting.
On – Display the ID address of the selected dome on the lower right portion of the
screen.
Off – Hide the ID address of the selected dome.
MAIN PAGE 2
ID DISPLAY ON
TITLE DISPLAY OFF
TITLE SETTING 01
PRESET ENTER
TOUR ENTER
AUTOSCAN ENTER
PATTERN ENTER
HOME SETTING ENTER