OpenEye CM-512 - Manual (Page 45)

31362AC 45
Exit
Exit the PATTERN menu and return to MAIN PAGE 2 to continue setting up the
Home setting.
Note
You can execute the pattern function using the keyboard controller. Refer to
the keyboard user manual for more information.
Home Setting
You can set an operation mode to ensure constant monitoring. If the dome idles for a
period of time, the preset function will be activated automatically. This is the HOME
function. This function allows constant and accurate monitoring to avoid the dome
idling or missing events.
Home Function
The item is used to enable or disable the HOME function. Use the left or right
direction keys of the control keyboard to change the setting.
Select Mode
Select one of the modes that the camera should execute when the HOME function is
enabled and the RETURN TME expires. The options include PRESET, TOUR,
AUTOSCAN, and PATTERN. Use the left or right direction keys of the control
keyboard to change the setting, and the items below will change in cooperating with
your selection.
HOME SETTING
HOME FUNCTION OFF
SELECT MODE PRESET
PRESET POINT 001
RETURN TIME 001 MIN.
GO ENTER
EXIT YES