OpenEye CM-512 - Manual (Page 50)

50
Dwell Time
The Dwell Time is the duration of execution for an alarm action. If the PRESET mode
is selected, the camera will always return to the selected preset position and stay
there for a user-defined time period (1-127 seconds / ALWAYS). If other modes are
selected (TOUR, AUTOSCAN, or PATTERN), the dome will continue to execute the
selected mode until the alarm condition is released or users rotate the dome.
Note
The dwell time is only adjustable when selecting Preset as the alarm action.
Alarm Output
The Alarm Output setting allows you to select which alarm (relay) output to activate
when the alarm input is activated. The CM-512 has two available relays, and you can
select to use 1, 2, or both (1 + 2), as well as Off to disable the function.
Exit
Exit the ALARM SETTING menu and go back to MAIN PAGE 3 to continue
configuring the WDR function.
Wide Dynamic Range (WDR)
The Wide Dynamic Range (WDR) function is used to resolve differing contrasts
between indoor and outdoor lighting and enhance image quality. WDR enables the
camera to catch detailed data from a darker indoor scene.
•
On – Enable the WDR function to automatically adjust the image
•
Off – Disable the WDR function.