OpenEye CM-512 - Manual (Page 48)

48
Alarm Setting
The integrated high speed dome camera provides eight alarm inputs and one alarm
output (NO or NC) to connect with alarm devices. With this function, the dome can be
integrated with an alarm system to capture images of alarm events as they occur. For
wiring, please refer to the installation manual and/or qualified service personnel.
Adjustable alarm parameters are listed here.
Alarm Pin
The dome provides 8 alarm inputs and 1 output (NO or NC). Select an alarm
connector to set parameters with this item, then set the alarm-related parameters in
the Alarm Setting menu. For alarm pin definitions, please refer to Alarm Pin
Definitions or the installation manual.
Note
If two or more alarm pins are triggered at the same time, the alarm pin with
the lower number will have higher priority. For example, if Alarm 1 and
Alarm 3 are triggered simultaneously, Alarm 1 will have priority.
Alarm Switch
The item is used to enable or disable the selected alarm pin function. Use the left or
right direction keys on the control keyboard to change the setting.
ALARM SETTING
ALARM PIN 1
ALARM SWITCH OFF
ALARM TYPE N.C.
ALARM ACTION PRESET
PRESET POINT 001
DWELL TIME ALWAYS
ALARM PRIORITY 1
EXIT YES