OpenEye CM-512 - Manual (Page 40)

40
Preset
You can set up to 256 preset points by following these instructions.
Tip You can set preset points through the keyboard. Refer to the control
keyboard user manual for more information.
Setting Preset Points
1. Press the right/left key on the keyboard to select a number.
2. Press CAMERA MENU on the keyboard, then rotate the camera to the desired
position.
3. Press CAMERA MENU again to save the defined preset point.
4. Once you have completed setup of a preset point, you can move the cursor to
the next item to run the preset point.
Running a preset
Select the preset point that you want to execute. Press ENTER. The camera will
move to the desired position.
Exit the Preset Menu
Exit the PRESET menu and go back to MAIN PAGE 2 to continue setting up a tour.