OpenEye CM-512 - Manual (Page 34)

34
Image
Digital Zoom
With this item, users can enable or disable the 12x Digital Zoom. The Digital Zoom
will be activated after the full Optical Zoom level is reached. Digital zoom ratio is
adjustable between 2x and 12x. The default setting is OFF.
Note
Optical zoom uses the lens within the camera to achieve the desired effect.
Optical zoom maintains the same quality and full resolution in the zoomed
image. Digital Zoom takes a portion of an image and expands it, reducing
image quality.
Slow Shutter
The shutter speed determines how long the image sensor is exposed to light. Enable
this function in order to see clear images in a dark environment. The Slow Shutter
function will automatically adjust the shutter speed based on lighting conditions.
DNR
With 2D/3D Digital Noise Reduction (DNR), the processor analyzes pixel by pixel and
frame by frame to eliminate environmental noise signal so that the highest quality
image can be produced even in low light. 3D DNR is more effective at removing
digital noise than 2D DNR>
IMAGE CTRL
MAX DIGI. ZOOM OFF
SLOW SHUTTER OFF
D.N.R. ENTER
IMAGE INVERSE OFF
FREEZE OFF
APERTURE 06
STABILIZER OFF
EXIT YES