OpenEye CM-512 - Manual (Page 30)

30
CONFIGURATION MENU
The detailed functions and parameter settings of your high speed dome can be set
through the OSD (On Screen Display) menu with a control device, such as a control
keyboard. The items in the OSD menu are described in the following sections. For
further detailed setup procedures, please refer to the user manual of your installed
control devices.
Entering the OSD Menu
To enter the OSD menu of the selected camera, press CAMERA MENU on the
control keyboard and hold for 3 seconds.
Selecting a Setup Item on the OSD Menu
To select a setup item, use the direction keys on the keyboard to move the OSD
cursor to your desired selection.
Setting Up an OSD Item
Use direction keys on keyboard to move the OSD cursor in the OSD menu.
For items with →, press right/left direction keys on the control keyboard to select.
For items with ↓, press the key on the control keyboard to enter
the sub menu.
For items with →↓, users can use the right/left direction keys to select functions, and
then press the CAMERA MENU key on the control keyboard to enter the sub menu.
Note
In the Camera OSD menu, the CAMERA MENU key functions as ENTER
and EXIT.