OpenEye CM-512 - Manual (Page 35)

31362AC 35
Image Inverse
Users can select ON to make the displayed image inversed vertically and horizontally.
Occasions to employ the function include conferences, demonstration, testing, etc.
When this function is enabled, the preset masks will be set off automatically (see
Privacy mask). The default setting is OFF.
Freeze
The Freeze function allows you to freeze the image while the camera is moving
between preset positions such as in PRESET and SEQUENCE modes. For example,
when the camera is programmed to move from point A to point B, the viewer will see
point A until the view directly cuts to point B without displaying the path along which
the camera moves between the points.
Aperture
Under this setup menu, users can adjust enhancement of the edges of objects in the
picture. The parameters of the aperture are adjustable, ranging from 00 to 16.
Stabilizer
The Stabilizer function is designed to accommodate for camera sway when the
camera is installed on a pole. This function will keep the image steady when the
camera sways back and forth. When enabled, the image stabilizer crops the viewable
area of the image to allow for sway correction.
Exit
Exit the IMAGE CTRL menu and go back to the MAIN PAGE 1 to set other functions
under TELEMETRY CTRL.