Niveo Professional NGSME16T2H - Manual (Page 360)

Chapter 5: Monitor, Diagnostic, Maintenance
Monitor, Diagnostic, Maintenance
NGSME16T2H User Manual | 360
Image Select
There are 2 image saved within the switch.
This page provides information about the active and alternate (backup) firmware
images in the device, and allows you to revert to the alternate image.
The web page displays two tables with information about the active and alternate
firmware images.
Note:
1. In case the active firmware image is the alternate image, only the "Active
Image" table is shown. In this case, theActivate Alternate Image button is also
disabled.
2. If the alternate image is active (due to a corruption of the primary image or by
manual intervention), uploading a new firmware image to the device will
automatically use the primary image slot and activate this.
3. The firmware version and date information may be empty for older firmware
releases. This does not constitute an error.
Image Information
Image
The flash index name of the firmware image. The name of primary (preferred) image
is image, the alternate image is named image.bk.
Version
The version of the firmware image.
Date
The date where the firmware was produced.
Buttons
Activate Alternate Image: Click to use the alternate image. This button may be
disabled depending on system state.
Cancel: Cancel activating the backup image. Navigates away from this page.