Niveo Professional NGSME16T2H - Manual (Page 222)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 222
Example:
Security/Network/ACL>policy 1 2
Access Control List
Syntax:
Security Network ACL Add [] [] [(port
)] [(policy )]
[] [] [] [] [(etype
[] [] []) |
(arp [] [] [] [] []) |
(ip [] [] [] []) |
(icmp [] [] [] []
[]) |
(udp [] [] [] [] []) |
(tcp [] [] [] [] []
[])]
[permit|deny] [] [] []
[][]
Parameters:
: ACE ID (1-256), default: Next available ID
: Next ACE ID (1-256), default: Add ACE last
port : Port ACE keyword
: Port list or 'all', default: All ports
policy : Policy ACE keyword
: Policy number (0-255)
: Policy number bitmask (0x0-0xFF)
: Tagged of frames: any|enable|disable
: VLAN ID (1-4095) or 'any'
: VLAN tag priority (0-7) or 'any'
: DMAC type:
any|unicast|multicast|broadcast
etype : Ethernet Type keyword
: Ethernet Type: 0x600 - 0xFFFF or 'any' but
excluding 0x800(IPv4) 0x806(ARP) and 0x86DD(IPv6)
: Source MAC address ('xx-xx-xx-xx-xx-xx'
or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx', x is a hexadecimal