Niveo Professional NGSME16T2H - Manual (Page 205)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 205
Power Reduction
Feature Command Line
LED Power Reduction
LED Intensity Times
Syntax:
led_power timers [] []
Parameters:
: The hour (0-24) at which to change LEDs intensity
: The LED intensity in % (0-100)
Example: (Time=2:00, Intensity: 30%)
led_power>timer 2 30
Maintenance
Syntax:
led_power maintenance []
[on_at_errors|leave_at_errors]
Parameters:
: Time in seconds (0-65535) that the
LEDs shall be turned on, when any port changes link state
on_at_errors|leave_at_errors: on_at_error if LEDs shall be
turned on if any errors has been detected. leave_at_errors if
no LED change shall happen when errors have been detected
Example:
led_power>main 20
led_power>main 20 on (20 sec., on_ad_errors enabled)
EEE Configuration
EEE Port
Configuration
Syntax:
EEE Mode [] [enable|disable]