Niveo Professional NGSME16T2H User Manual
Page 234
Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 234
(
Valid values are in the range 6 to 40 seconds, and MaxAge must be
<= (FwdDelay-1)*2.
)
Maximum Hop Count
Syntax:
STP MaxHops [
(
Valid values are in the range 6 to 40 hops)
Transmit Hold Count
Syntax:
STP Txhold [
(
Valid values are in the range 1 to 10 BPDU's per second.)
Advanced Setting
Syntax:
STP bpduFilter [enable|disable]
STP bpduGuard [enable|disable]
STP recovery [
(
After
recovery timeout time is set, the recovery is enabled
automatically.)
MSTI Mapping
MSTI/VLAN Mapping
Syntax:
STP Msti Add
Example:
STP>mst add 1 100
Add VLAN 100 to MSTI1
STP>mst map
MSTI VLANs mapped to MSTI
---- --------------------
MSTI1 100
MSTI2 No VLANs mapped
MSTI3 No VLANs mapped
MSTI4 No VLANs mapped
MSTI5 No VLANs mapped