Niveo Professional NGSME16T2H - Manual (Page 240)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 240
IPMC>proxy igmp dis (Disable)
Port Related
Configuration
(Router Port, Fast
Leave, Throttling)
Syntax:
IPMC Router [mld|igmp] [] [enable|disable]
IPMC Fastleave [mld|igmp] [] [enable|disable]
IPMC Throttling [mld|igmp] [] [limit_group_number]
Example:
IPMC>router igmp 25-26 en (Port 25-26 are router ports)
IPMC>Fast igmp 1-24 en (Enable IGMP Fast Leave on P1-24)
IPMC>thro igmp 1-2 5 (Throtting of Port 1, 2 is 5 groups.)
VLAN Configuration Syntax:
IPMC State [mld|igmp] [] [enable|disable]
IPMC Querier [mld|igmp] [] [enable|disable]
IPMC Compatibility [mld|igmp] [] [auto|v1|v2|v3]
IPMC Parameter RV [mld|igmp] [] [ipmc_param_rv]
IPMC Parameter QI [mld|igmp] [] [ipmc_param_qi]
IPMC Parameter QRI [mld|igmp] [] [ipmc_param_qri]
IPMC Parameter LLQI [mld|igmp] [] [ipmc_param_llqi]
IPMC Parameter URI [mld|igmp] [] [ipmc_param_uri]
Example:
IPMC>state igmp 2 en (Enable IGMP Snooping on VLAN 2)
IPMC>quer igmp 2 en (Enable IGMP Querier on VLAN 2)
IPMC>compa igmp 2 v2 (Enable IGMPv2 on VLAN 2)
MLD Snooping
MLD Snooping Note: The MLD Snooping is applied to IPv6 Multicast. The
commands are the same as above IGMP Snooping (IPv4)
Commands. Just chooses mld instead of igmp when seeing