Niveo Professional NGSME16T2H - Manual (Page 197)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 197
CLI Overview
After login the switch through console CLI, you can see the ">" mark. You can type
the command after it. There are some useful command, such as:
Type '' to enter command group, e.g. 'port' to the port configuration.
Type ' ?' to get list of group commands, e.g. 'port ?'. You can follow the
instruction step by step to finish the command.
Type ' ?' to get help on a command, e.g. 'port mode ?'.
Type 'up' to move up one level or '/' to go to root level
Type "logout" in root level to leave the command line interface
Click "Enter" key after finish the command.
Click "Up" key to repeat the previous commands
Commands may be abbreviated, e.g. 'por co' instead of 'port configuration'. For
quick configuration, the abbreviated typo is helpful.
Example: Configure the System Contact to Orwell
You can go to system group or type the full name in root level. Both of the methods
can meet your need.
In system group mode:
System>contact Orwell
In root level:
>sys contact Orwell
Note: This chapter just lists the relevant command lines of the feature settings for
your reference. You can see the detail explanation of the commands and features
through the chapter 3.