Niveo Professional NGSME16T2H - Manual (Page 109)

Chapter 3: Featuring Configuration – Web UI
Featuring Configuration – Web UI
NGSME16T2H User Manual | 109
TACACS+ Authentication Server Configuration
The table has one row for each TACACS+ Authentication Server and a number of
columns, which are:
#
The TACACS+ Authentication Server number for which the configuration below
applies.
Enabled
Enable the TACACS+ Authentication Server by checking this box.
IP Address/Hostname
The IP address or hostname of the TACACS+ Authentication Server. IP address is
expressed in dotted decimal notation.
Port
The TCP port to use on the TACACS+ Authentication Server. If the port is set to 0
(zero), the default port (49) is used on the TACACS+ Authentication Server.
Secret
The secret - up to 29 characters long - shared between the TACACS+ Authentication
Server and the switch.
Buttons
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved
values.